Q&A
GEKKOU DRILL for MACHINING
Q Regular or long size are available?
Q Will you plan to launch GEKKOU DRILLS of 2 mm or less?
Q Is it possible to place an order for special sizes which are not available right now?
Q Is it possible to make a custom-made drill for 1/100 mm size spec?
Q Are you going to launch GEKKOU DRILL with oil hole, taper, and dunk type?
Q How much the prices are different from other conventional drill bits ?
Q Are you going to launch GEKKOU DRILL for super steel?
Q What is the price difference from super steel drills?
Q Now I use drill bits for super steel, but the cutting condition is same?
Q Can it be used in general-purpose machines such as ball plates and hand drills?
Q Now I have grinding machine D-KEN13. Is it possible to grind GEKKOU DRILL with it?
Q Is there any specific grinding machine which is only for GEKKOU DRILLS?
Q How the cutting ability for the re-grinding drill bit is different from the new one?
Q Are there any other ways than re-grinding?
Q How long does it take to re-grind the drill bits at BIC TOOL?
Q Could you tell us the process of re-grinding the drill bits at BIC TOOL?
Q How to Re-grind the drill bits?
Q What is the surface roughness?
Q How different are process curing?
Q Are there any problem such as involvement or peripheral wound by debris?
Q What is the status of the cutting swarf during drilling?
Q Can we do nonstep processing?
Q Can it be done by dry processing?
Q Is it possible to use the cutting oil with oily type?
Q Is the pilot hole necessary ?
Q Do the drill bit walk without a center drill?
Q How much mm can the plate thickness cut?
Q Is thinning less than or equal to 1 mm effective?
Q Is it possible to drill into curved, round objects?
Q Is there a back burr when we drill on a pipe?
Q How durable is it compared with other conventional drill bits?
Q How much HRC (hardness) it is possible to cut?
Q Can it be cut even with metal after roasting?
Q Can metals such as aluminum, copper, and brass also be cut?
Q Is it possible to cut such as SUS303 and SUS316 systems?
Q Is there a Manufacturer-Recommended Cutting Condition Table?
Q Is there information such as total length, groove length?
Q What is the type of coating?
Q What is the material of GEKKOU DRILL?
Q What is the lineup of sizes?
Q What is the best benefit of GEKKOU DRILL?
GEKKOU DRILL for HSSCo
Q Did GEKKOU DRILL out on Television?
Q What is the origin of the name of GEKKOU DRILL?
Q Can we buy from a single piece?
Q How long does the delivery take?
Q Can you deliver anything other than the standard inventory in the catalog?
Q Do you have GEKKOU DRILL for machining (stub type)?
Q Is There a Straight and Other-Sized Plan to Launch?
Q Could you tell us the size ranges ?
Q Can we re-grind the groove of GEKKOU DRILL?
Q Why is there a groove at the tip only?
Q Can’t it be used when the sulcus of the lunar drill is lost?
Q How many times can we re-grind GEKKOU DRILL ?
Q Is it impossible to re-grind with the grinding machines which we are currently using?
Q Is there no polishing machine dedicated to moonlight drilling?
Q Is it possible to re-grind GEKKOU DRILL?
Q How much HRC (hardness) can cut?
Q Metals such as aluminum, copper, and brass can also be cut?
Q Is it possible to cut metals?
Q Is it possible to cut SUS303?
Q Is it possible to cut SKD (die steel) ?
Q Can it be cut even with metal after quenching?
Q How much mm can the plate thickness cut?
Q What is the accuracy after cutting?
Q Will it be chipped, broken or burnt?
Q Doesn’t the back burr appear even with a thin plate?
Q Isn’t there a burr on the back?
Q Can we drill on the plate with pilot hole ?
Q Is the pilot hole not necessary?
Q Is the center punch not necessary?
Q What is the rotation speed ?
Q Can it also be used in truck-mounted sites?
Q Can it also be used with milling machine in general?
Q Can it also be used with lathe in general?
Q Can we also use a ball board?
Q Can we also use rechargeable drills?
Q Can it be used in machinery centers?
Q What is the material of GEKKOU DRILL?
Q Do you have any sample drill bits ?
Q How expensive GEKKOU DRILL is comparing with the conventional drill bits ?
Q How durable is it compared with other drill bits?
SPOT CUTTER GK-KIN
Q I want to keep KINTARO for as long as possible, but is there any good way to do it?
Q KINTARO can be re-grinded only in S-2000?
Q Is the unique tip shape unable to re-grind?
Q Why GEKKOU KINTARO is so sharp ?
Q Recent cars have hard steel plates, and it is difficult to replace the panel. Is there any good way?
EZ-13
Q I would like to try on a real ground?
Q What is the size and weight of the machine?
Q Is a dust collector necessary?
Q How to tell the life of a grindstone?
Q Is it possible to change the languages?
Q Can I use this in foreign countries?
Q Do we need to set all the setting every time we use ?
Q Sensors do not detect the edge.
Q How long is the grinding time?
Q Although there is a standard and a low speed of grinding?
Q What is the grinding accuracy?
Q Is it possible to re-grind the broken drill bits ?
Q How many heel angles for thinning?
Q Can the escape angle of the second and third corners be changed?
Q What happens if the core thickness setting is wrong?
Q Input core thickness, but which value?
Q How many times can I grind with a single grindstone?
Q Can carbide drills be grinded with CBN grindstones?
Q Can hydrodrills be grinded with DIA grindstones?
Q Can carbide drills be grinded?
Q Do we need dressers for grindstones?
Q What is the grain size of the grindstone?
Q What is the type of grindstone?
Q What type of grinding type is possible ?
Q Can it also be used in leading drills?
Q Can we also grind the endomill?
Q Can the endomill shank also be grinded?
Q What is the grindable length?
Q What kind of installation record do you have?
Q What is the introduction benefit?
Q What is the difference in price costs from outsourced grinding?
